ROUTER BOOST

Contact Us

Tplinkwifi.net directly links to smart setup wizard if you are trying to setup the wireless router. Get the hold of the router login web page by using tplinkwifi.net or www.tplinkwifi.net web address. If any problem is blocking you to access the Genie page, try the IP address 192.168.1.1 for all the WiFi routers, 192.168.0.1 for old wireless router. Install the router app for smartphones or instrumental board for a desktop to monitor your network. Try hypertext links http://tplinkwifi.net or http://www.tplinkwifi.net in case of tplinkwifi.net not working.

Router Setup
Router Setup

To get to your router setup page, just go to www.tplinkwifi.net or http://tplinkwifi.net in your standard web browser.

Dual Band Router
2.4 GHz Band

Connect the devices which are little far from the router with the 2.4GHz wireless band to avoid any interruption.

5 GHz Band

Connect your 5G compatible devices with the 5GHz wireless band if you want the better internet speed.

IP Address

The default IP address for router setup and login is often 192.168.0.1, but it may vary depending on the router model.

Prepare For Router Login

Check the recent router firmware upgrade available to complete the wireless router configuration and reach the secure router login page.

  • Connect all the Ethernet cables at the rear of the cable modem and the wireless router.
  • Attach the cable from one of the LAN port of the wireless router to the computer.
  • Power off the router, cable modem and the laptop for two minutes to begin with routerlogin.net process.
  • Access the router login web page with the following web links:
  1. Tplinkwifi.net
  2. www.tplinkwifi.net
  3. 192.168.1.1
  • Visit the smart setup wizard page with the default username and the password to change the Wi-Fi password.
Router Login

Router Setup: Connect, Configure, and Go Online

Installing the WiFi Router is easy using the Smart Setup Wizard program. The router login is available even if the router doesn’t have any internet connection.

Select one the following mode to configure your router using tplinkwifi.net

Smart Setup Mode
Smart Setup Mode

Access the control panel of the router using tplinkwifi.net web address. Click forgot to access the routerlogin.net password recovery page if you don’t remember the password. Tap or click ‘Setup Wizard’ from the top left on the router’s dashboard and follow the on-screen instructions. Select the Genie help to automatically detect the type of the internet connection of your cable modem. Edit the wireless name and the password and save the settings of the router.

Wizard Mode
Wizard Mode

Launch Google Chrome or Microsoft edge and type router login IP to access the router page. Enter the tplinkwifi.net default credentials to enter the Genie page. Get the help of the setup wizard to identify the type of internet connection and enter the static IP if you are using DSL internet. Tap or click ‘Next’ and router will apply the change in the router settings. Connect all the devices and access any website to check if you are connected to the internet or not.

Can’t access Tplinkwifi.net?

Router login not working troubleshooting:

  • Ensure that the home router is not so close to any other electronic device to avoid any interruption.
  • Make sure the device is not more than 20 feet away from the wireless router.
  • Antennas are the important hardware of the wireless router, so adjust the antennas in the right direction to receive a stable signal in your device.
  • If the WiFi router is attached with the surge protector, connect it with the Power outlet to receive a sufficient amount of voltage.
  • Disconnect rest of the electronic devices from the Wi-Fi and try using the default IP address to log in to the wireless router.

HOW TO CHANGE CHANNELS ON WiFi ROUTER?

    • Open any internet browser on your desktop or laptop connected to the router wired or wirelessly.
    • Now type http://tplinkwifi.net or www.tplinkwifi.net in the web search bar of the browser and hit enter.
    • Router login authentication screen will appear and enter the default username as admin and default password as ‘password’ for all new routers.
    • Tap or click the wireless > network > channel to set the channels according to you.
    • Channels are selected on auto by default under wireless settings and you can change the channels as advised by your tech expert.
    • Change the wireless channels to 2, 8 or 11 as recommended in the United States.
    • Click the apply option to update the settings of channels for your wireless router and adjust the location of the router to avoid any interruption in Wi-Fi signals.

HOW TO CREATE GUEST NETWORK FOR ROUTER?

  • Launch a browser and type tplinkwifi.net or www.tplinkwifi.net (alternatively, you can use the default IP address 192.168.0.1 in case of wireless modems)
  • Enter the default credentials for the router. The default username is admin and password as password, click login to enter the router settings page.
  • The router login GUI screen will appear, click on BASIC > Guest Network to enable the guest network.
  • Type the guest wireless passphrase and click apply to update the router settings.
  • Now you can give your guest network passphrase to your visitors so, they can connect their wireless devices.
  • Do not share your guest network password to any stranger. Only share with the known guests.
  • Type a different wifi name for your guest network. Do not create same guest wifi name as your router’s wifi name.
Scroll to Top